GEPRC 6S 1550mAh 60C/120C High Voltage LiPo Battery

Summary

This is a GEPRC 6s 1550mAh high voltage (HV) LiPo battery with 4.35V per Cell. Please read the Q&A if you are not familiar with HV batteries.

This HV battery is designed to provide more power for 3-5 inch drones with less weight of only 193g. This makes it the perfect HV LiPo for the GEPRC Cinelog35 Performance. 

Compared to ordinary lipo batteries, the high voltage batteries have more energy for the same weight, which results in longer flight times. High voltage batteries have higher energy density, higher discharge rate and more power with a smaller volume and less weight.

Higher discharge rate can make your drones more powerful.

Feature

• More energy, higher energy density
• Longer flight time
• Lighter weight
• Higher Discharge Rate

Specification

• Model: GEPRC 6S 1550mAh 60C
• Model Number: GEP15506S60AHV
• Capacity: 1550mAh
• Configuration: 6S1P
• Nominal Voltage: 22.8V
• Type: Li-HV
• Watt: 35.34WH
• Dimension: 41*34*76mm
• Weight: 193.0g
• Max cont. discharge (C-rate/current): 60C
• Max Burst (C-rate/current): 120C
• Charge Connector: XT60
• Discharge Connector: X60
• Recommended charging current: 1C
• Maximum charging current: 3C
• Working Temperature Charge: 0-45°C
• Working Temperature Discharge: -20-60°C
• Working Humidity: 65%RH +/-20%
• Storage Temperature: -20-35°C
• Storage Humidity: 65%RH +/-20%
• Application: Toys, Boats, Quadcopter

Warning

• Please read the battery parameters and instructions in detail before use.

• Don’t charge the battery unattended.

• Do not overcharge (select the correct battery type before charging, the full charge voltage of single cell of LiPo battery is not more than 4.2V, and the full charge voltage of single cell of Li-HV battery is not more than 4.35V).

• Do not over-discharge ( the single-cell discharge voltage of LiPo and Li-HV batteries cannot be lower than 3.5V, over-discharging will damage the battery and cause swelling).

• Don’t place the battery close to open flames or fire sources.

• Keep the battery away from flammable materials when charging.

• Carefully check the battery voltage and capacity before charging and use

• It is forbidden to reverse the positive and negative poles of the battery to avoid short circuit.

• Do not directly touch the leaking battery. If you accidentally touch the electrolyte, wash your hands with clean water immediately. If it is serious, consult a doctor immediately.

• Dispose of a ruptured battery immediately and do not reuse it.

• If you need to store the battery for more than a few days, maintain the battery voltage at a single-cell at 3.80V-3.85V. Ensure that a charge-discharge activation is performed within 3 months to maintain the stability of the battery.

• It is forbidden to disassemble and reassemble the battery or change the wiring (it is easy to cause short circuit and a fire).

• If a collision occurs during use, remove the battery. Check carefully if the battery and connector are damaged.

• Charge at a temperature of 0-45℃ (ideally at room temperature, make sure the charging environment is cool and ventilated, the battery will generate a certain amount of heat after use and during the charging process, and the battery that has just been used is allowed to cool down below 45℃ before charging).

FAQ

Q: What is High Voltage Battery?

A: Voltage of High Voltage Battery higher than ordinary battery. The maximum charging voltage of high voltage battery is 4.35V, and ordinary only 4.2V.

Q: What is the appropriate charging rate C for the battery?

A: The charging rate supports up to 3C, and it is recommended to use 1-1.5C, which will basically have no effect on the life of the battery.

Q: What kind of charger is used to charge the battery?

A: It is recommended to use the HOTA D6 PRO charger, ISDT 608AC charger and ToolkitRC M6D charger.

Includes

• 1 x GEPRC 6S 1550mAh 60C HV Battery